Free shipping on every orderQuote within 24 hours
Custom Blind Boxes

Cube Blind BoxesCustom cube-shaped boxes, made to fit

Last updated

Cube blind boxes have the same length, width and height, so every side is the same size and your artwork wraps evenly all the way round. We make these printed cube boxes to your measurements, seal end or tuck end, sized to hold a figure or charm snugly. Line a few up and any face can be the front.

  • Any size you need
  • Seal end or tuck end

1 / 4

Printed cube box with simple line art for a collector series
Printed Cube Boxes for Collector Series

Start your free estimate

A rough idea is plenty. We'll ask about anything we need.

PDF, PNG, JPG, GIF, WEBP, SVG, AI, EPS, PSD, ZIP, RAR, DOC, XLS. 20 MB max total.

    Included with every order

    • Free dieline with your order

      Your box template arrives drawn to your size, with bleed and fold lines marked, so your designer starts on the right shape.

    • Proof and 3D mockup, free

      See your design on the flat template and on a 3D box. Nothing goes to press until you approve it.

    • Made in 8 to 10 business days

      The clock starts when you approve your proof. Tell us your deadline up front and we'll plan the run around it.

    • Free shipping to five countries

      Delivered free to the United States, Canada, the United Kingdom, Australia and New Zealand. The price you approve is the price you pay.

    Built around what's inside

    Every box is cut and printed for your order, so any of these can change. Pick what suits your product and we'll quote it.

    Closes
    Seal end with a tear-open zipper, or a tuck flap
    Arrives
    Ships flat, then folds into a cube by hand
    Best for
    Charms and small collectibles
    Size
    Your length, width and height
    Board
    18pt white board, Heavier board, Brown kraft
    Printed on
    Outside, Inside, Inside and outside
    Lamination
    Matte, Gloss
    Extra finishes
    Foil, Spot UV, Embossing, Debossing
    Closure
    Straight tuck end, Reverse tuck end, Seal end with tear-open zipper
    Design help
    Free dieline with every order, Free proof and 3D mockup

    Questions about Cube Blind Boxes

    A cube box is a folding carton whose length, width and height are all equal, so all six sides match. It stands steady on any face and gives your artwork the same canvas all round. Ours are printed to whatever size you need.

    Measure your product at its widest point and send us that size; we'll suggest a cube that holds it without rattling. Every side comes out equal, so one number covers the length, width and height. Heavier products can move up to a thicker board so the corners stay crisp.

    Because every face is the same size, a pattern can wrap around all four sides without breaking at the corners. Pick one face as the front for your logo, and on a seal end cube keep it clear of the zipper on top. Our free template generator draws a cube when you enter the same number three times.

    Yes. Cube boxes print in runs like any of our cartons, and the price per box drops as the quantity goes up. Every estimate shows a few quantities side by side, and our blind boxes wholesale page covers planning larger orders.

    Go with seal end if the cube should open once, with a tear-open zipper across the top. Choose tuck end if it will be reopened, for storing the item or showing it off. Both cost the same, and the style is settled at proofing.

    What makes a cube box different

    Cube boxes are cartons where every edge measures the same, so the box looks the same whichever way it's turned. For blind boxes that's handy: a square shape on every side gives a small figure or keychain charm a compact home, and a row of them on a shelf looks tidy from any angle.

    Ours start out like every carton we make, as a flat sheet of board that's printed and then cut to shape. The standard board is 18pt white, with heavier grades or brown kraft if you need them. Once it's folded, the walls match the top and base exactly, which is what gives cube box packaging its neat, solid look.

    The shape suits products that are roughly as tall as they are wide. A seated figure or a small stack of pins fills a cube well, while a tall, slim figure would leave empty space at the sides. If your product is clearly longer in one direction, a rectangular box usually fits it better, and it takes the same printing and finishes. We also make custom square boxes, where the top and base are square but the box is taller or shorter than it is wide. That suits a flat charm or a tall figure.

    Cubes stack well, too. With the top and base the same size as every wall, the boxes sit squarely on top of each other, so a stacked tower on a market table or shop counter is easy to build.

    How to size custom cube boxes

    Sizing a custom cube box comes down to one number. Measure the product at its widest point, whichever direction that falls, and that figure is your starting point for all three sides. We'll look at what you're packing and suggest a cube to match.

    A close fit matters more on a cube than on most shapes. The space inside is equal in every direction, so a product that's too small for it can tip over and slide around in transit. A snug cube keeps it upright and quiet until the box is opened.

    If your series mixes figures of slightly different sizes, size the cube to the largest one. That way every box in the series matches, and no one can guess which figure is inside from the size of the box.

    Measure the product the way it will be packed. If a small card or a bag goes in the box with it, include that in your number. The packed size is what the cube has to hold.

    Weight is the other thing to think about. Light charms and pins sit comfortably in 18pt board, while a heavier resin figure is better in a thicker board that keeps the walls straight and the corners sharp.

    You can try a size before you order. Our free template generator draws a cube dieline when you type the same measurement into length, width and height. Those numbers are the size of the box itself, not of the space inside it, and every order includes its own dieline at your size anyway.

    Designing printed cube boxes

    Printed cube boxes give you four equal side panels plus a matching top and base. This is the nicest thing about designing for the shape: a pattern can run around the box and meet itself at the last corner, so the box looks finished from every side.

    Even on a cube, one face should carry your logo and the series name, so the box has a clear front when it's lined up with others. The panels either side can repeat the pattern or hold smaller details like a series number.

    Matte lamination is the finish our clients pick most often, and its soft look sits well on a cube's flat faces. If one detail on the front should catch the light, add foil or spot UV to just that part, such as the logo.

    The top needs a little planning. On a seal end cube, the tear-open zipper runs across it, so keep faces and logos off that strip and give the top a pattern that still looks right once torn. On a tuck end cube, the lid flap can carry artwork too, though anything on the narrow tongue disappears once it's tucked in.

    The base and the inside are easy to overlook. The base is what people see when they turn the box over, and printing the inside gives the buyer something new to find once it's open. For file setup and color advice, see printed blind boxes. Before anything prints, you'll get a digital proof and a 3D mockup of the folded cube.

    Ordering cube boxes in bulk

    Cube boxes are ordered like any of our cartons, starting from your size. On bulk cube box orders, the price per box comes down as the quantity goes up, and each estimate lays out a few quantities so you can compare them.

    Planning a large run or restocking a series? Our blind boxes wholesale page covers how bigger orders work. Keeping one cube size across a whole series also keeps the boxes uniform on the shelf.

    The closure is your call. A seal end cube opens once along the zipper, while a tuck end cube opens and closes again. Neither costs more, so choose by how the box gets used.

    Your cubes ship flat and nested and fold into shape by hand on packing day. Expect the run to be ready 8 to 10 business days after you approve the proof. We deliver free to the US, Canada, the UK, Australia and New Zealand. Once you have a measurement, send it for a free estimate.